X-Carve: Easel

From Spark Makerspace
Revision as of 21:26, 3 June 2023 by Dan (talk | contribs) (→‎Login to Easel)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Introduction

The Spark Woodshop uses the default software for the X-Carve, Easel. Easel is a combination of computer aided design (CAD) and computer aided manufacturing (CAM) software. It is a very user friendly software, but has limited capabilities. It is free to sign up for an account, but some more advanced capabilities require a subscription.

Login to Easel

Go to https://easel.inventables.com/users/sign_in and sign in

Creating a New Easel Account

Go to https://easel.inventables.com/users/sign_in and choose "Create New Account" then follow the prompts.

Easel Start Screen

Upon logging in, the Easel Start Screen will appear, as in the example shown below. Users can either choose an existing project to continue working on, or click the green "New Project" button to start a new project from scratch. Either option will bring them to the Easel main screen.


WS X-Carve EaselStartScreen2.png


Easel Main Screen

The main Easel screen is divided into two major sections: the CAM portion on the left half of the screen, and the simulation portion on the right. The divider separating the two can be dragged left and right with the mouse to change the area of screen dedicated to each side.

WS X-Carve EaselScreen.png

A. CAM Workspace B. Simulation Workspace
C. Project Name I. Carve Controls
D. Geometry Toolbar J. Machine Jog Controls
E. X and Y axis origin - “zero” K. Workpiece Definition
F. Units Toggle L. Cutting Bit Selection
G. Additional Workpieces (shown hidden) M. Cut Settings (depth of cut, “feeds and speeds”)
H. Zoom and Home controls N. Simulation Start Button

Machine Setup

For new Easel accounts, the parameters for the Spark X-Carve should load automatically when logging into the Woodshop computer attached to the X-Carve controller.

If there are any issues, follow these steps to make sure the machine settings are correct:

  1. Choose the "Machine" option in the top left of the screen
  2. Click on the "Edit Your Machine" button.
  3. Match the parameters to the image below
  4. Press the Save button.
WS X-Carve MachineSetup.png