Woodshop Class - Six-Pack Carrier

Description

This class will teach introductory hand tool use and woodworking assembly techniques. Students will cut, drill, screw, nail, glue, and sand the parts of a six pack carrier, including wooden dividers. At the end of the class, students will take the assembled carrier home to be stained, painted, clear-coated, or left raw to develop a natural patina through use.

Tools

For tool guides and manuals, see: Woodshop Tools

• Cordless drill
• Drill Bits:
  • 3/4-inch spade bit
  • #6 countersink bit
  • 1/16-inch twist bit
• Combination square
• Measuring tape
• Pencil
• Awl
• Miter saw
• Screwdriver
• Coping saw or dovetail saw
• Hammer
• Rasp
• Sander

Certifications

No certifications occur as part of this class.

Materials

• 1” x 6” pine or fir (nominal; actual size 3/4" x 5-1/2"), 3 pieces 8-¼ inches long
• 1/4" x 1-1/2" x 48” hardwood or plywood; popular will be used for this class
• 1/4" x 3-1/2" x 24” hardwood for plywood; poplar will be used for this class
• #8 x 2” flat head wood screws
• 17ga x 1” nails
• Wood glue; Titebond II will be used for this class

Handout

⇓ Download Six-Pack Carrier Class Handout

Examples

• 

  Example of the carrier in (non-alcoholic) use