Woodshop Class - Six-Pack Carrier

From Spark Makerspace
Revision as of 15:55, 6 April 2024 by Dan (talk | contribs) (Created page with "Category:WoodshopCategory:Woodshop Class ==Description== This class will teach introductory hand tool use and woodworking assembly techniques. Students will cut, drill...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Description

This class will teach introductory hand tool use and woodworking assembly techniques. Students will cut, drill, screw, nail, glue, and sand the parts of a six pack carrier, including wooden dividers. At the end of the class, students will take the assembled carrier home to be stained, painted, clear-coated, or left raw to develop a natural patina through use.

Tools

For tool guides and manuals, see: Woodshop Tools

  • Cordless drill
  • Drill Bits:
    • 3/4-inch spade bit
      1. 6 countersink bit
    • 1/16-inch twist bit
  • Combination square
  • Measuring tape
  • Pencil
  • Awl
  • Miter saw
  • Screwdriver
  • Coping saw or dovetail saw
  • Hammer
  • Rasp
  • Sander

Certifications

No certifications occur as part of this class.

Materials

  • 1” x 6” pine or fir (nominal; actual size 3/4" x 5-1/2"), 3 pieces 8-¼ inches long
  • 1/4" x 1-1/2" x 48” hardwood or plywood; popular will be used for this class
  • 1/4" x 3-1/2" x 24” hardwood for plywood; poplar will be used for this class
    1. 8 x 2” flat head wood screws
  • 17ga x 1” nails
  • Wood glue; Titebond II will be used for this class

Handout

Download Six-Pack Carrier Class Handout

Examples