Difference between revisions of "Woodshop Class - Six-Pack Carrier"
Jump to navigation
Jump to search
(→Tools) |
|||
| Line 8: | Line 8: | ||
*Drill Bits: | *Drill Bits: | ||
**3/4-inch spade bit | **3/4-inch spade bit | ||
| − | **#6 countersink bit | + | **<nowiki>#</nowiki>6 countersink bit |
**1/16-inch twist bit | **1/16-inch twist bit | ||
*Combination square | *Combination square | ||
| Line 22: | Line 22: | ||
===Certifications=== | ===Certifications=== | ||
| − | No certifications occur as part of this class. | + | No certifications occur as part of this class. |
==Materials== | ==Materials== | ||
Latest revision as of 15:56, 6 April 2024
Description
This class will teach introductory hand tool use and woodworking assembly techniques. Students will cut, drill, screw, nail, glue, and sand the parts of a six pack carrier, including wooden dividers. At the end of the class, students will take the assembled carrier home to be stained, painted, clear-coated, or left raw to develop a natural patina through use.
Tools
For tool guides and manuals, see: Woodshop Tools
- Cordless drill
- Drill Bits:
- 3/4-inch spade bit
- #6 countersink bit
- 1/16-inch twist bit
- Combination square
- Measuring tape
- Pencil
- Awl
- Miter saw
- Screwdriver
- Coping saw or dovetail saw
- Hammer
- Rasp
- Sander
Certifications
No certifications occur as part of this class.
Materials
- 1” x 6” pine or fir (nominal; actual size 3/4" x 5-1/2"), 3 pieces 8-¼ inches long
- 1/4" x 1-1/2" x 48” hardwood or plywood; popular will be used for this class
- 1/4" x 3-1/2" x 24” hardwood for plywood; poplar will be used for this class
- #8 x 2” flat head wood screws
- 17ga x 1” nails
- Wood glue; Titebond II will be used for this class
Handout
⇓ Download Six-Pack Carrier Class Handout
Examples
Example of the carrier in (non-alcoholic) use
