Woodshop Class - Certification Crate

From Spark Makerspace
Revision as of 15:01, 6 April 2024 by Dan (talk | contribs) (→‎Materials)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Description

This intensive two-day introduction to the woodshop starts with two pieces of rough-cut fir and ends with a light-duty wooden crate for the student to take home. Students will then receive safety instructions, operation guidance, and usage certification for the tools listed below.

Tools

For tool guides and manuals, see: Woodshop Tools

  • Measuring Tape
  • Jointer
  • Planer
  • Table Saw
  • Miter (chop) saw
  • Drill Press (1” bit)
  • Portable jigsaw
  • Bandsaw
  • Router with ⅛” radius roundover
  • Portable sander
  • Air tools
  • Cordless drill

Certifications

Spark members will be certified to use all the tools above after the class.

Materials

  • 2x6x48 board (this will be resawn prior to class into two boards approximately ¾” thick)
  • Wood glue

Handout

Download Certification Class Handout

Examples

No pictures yet . . . email some to the Woodshop Leads at [email protected]