Difference between revisions of "Autodrop3D Printing Guidelines"

From Spark Makerspace
Jump to navigation Jump to search
(Created page with "===Guidelines for Printing on Autodrop3D Printers at Spark== * Printing with support is not recommended. If you print without support, that's on you. * All models are printed...")
 
Line 1: Line 1:
===Guidelines for Printing on Autodrop3D Printers at Spark==
+
===Guidelines for Printing on Autodrop3D Printers at Spark===
  
 
* Printing with support is not recommended. If you print without support, that's on you.
 
* Printing with support is not recommended. If you print without support, that's on you.

Revision as of 21:02, 26 October 2020

Guidelines for Printing on Autodrop3D Printers at Spark

  • Printing with support is not recommended. If you print without support, that's on you.
  • All models are printed on a raft. We recommend you position your model accordingly so that you are able to remove the raft.
  • Maximum print size is: 280mm Dia x 385mm H print area. Practical max print size is probably less than that. Ping the Electronics Leads before starting a massive print.

Questions or problems? Ping the Electronics Leads.