Autodrop3D Printing Guidelines

From Spark Makerspace
Jump to navigation Jump to search

Guidelines for Printing on Autodrop3D Printers at Spark

  • Printing with support is recommended. If you print without support, that's on you.
  • All models are printed on a raft. We recommend you position your model accordingly so that you are able to remove the raft.
  • Maximum print size is: 200mm length x 200mm width x 300mm Height print area. Practical max print size is probably less than that. Ping the Electronics Leads before starting a massive print.

Questions or problems? Ping the Electronics Leads.