Difference between revisions of "3D Printing"

From Spark Makerspace
Jump to navigation Jump to search
(Created page with "Category:Electronics This section left blank for now.")
 
Line 1: Line 1:
 
[[Category:Electronics]]
 
[[Category:Electronics]]
  
This section left blank for now.
+
3D Printing at Spark is supported by the [[Electronics Leads]] and [[Autodrop3D]]'s Cloud design/print platform and offers printer access to members.
 +
 
 +
==I have a design in mind, where do I start?==
 +
 
 +
To 3D print your idea, you'll need a 3D model in the STL format (or created through [[Autodrop3D]]'s cloud CAD platform. Not sure where to start? Stop by and chat with the 3D printing nerds at [[Electronics Night]]
 +
 
 +
==I have an STL file already. how do I print?==
 +
 
 +
* Head to [[https://go.autodrop3d.com go.autodrop3d.com]] and create an account.
 +
* Send an email to the [[Electronics Leads]] with the username and email address you used to register.
 +
* We'll add you to the Spark Members organization and let you know once you're set (usually within a couple of hours).
 +
* Take note of the [[Autodrop3D Printing Guidelines]] here.
 +
* Upload an STL to the Autodrop site, create an order, and watch for the email when it's done.
 +
* If you have any issues getting started, pop in on [[Electronics Night]] and ask, or reach out to the [[Electronics Leads]]

Revision as of 20:53, 26 October 2020


3D Printing at Spark is supported by the Electronics Leads and Autodrop3D's Cloud design/print platform and offers printer access to members.

I have a design in mind, where do I start?

To 3D print your idea, you'll need a 3D model in the STL format (or created through Autodrop3D's cloud CAD platform. Not sure where to start? Stop by and chat with the 3D printing nerds at Electronics Night

I have an STL file already. how do I print?

  • Head to [go.autodrop3d.com] and create an account.
  • Send an email to the Electronics Leads with the username and email address you used to register.
  • We'll add you to the Spark Members organization and let you know once you're set (usually within a couple of hours).
  • Take note of the Autodrop3D Printing Guidelines here.
  • Upload an STL to the Autodrop site, create an order, and watch for the email when it's done.
  • If you have any issues getting started, pop in on Electronics Night and ask, or reach out to the Electronics Leads