Autodrop3D Printing Guidelines
Revision as of 22:48, 26 October 2020 by Mmiscool (talk | contribs) (→Guidelines for Printing on Autodrop3D Printers at Spark)
Guidelines for Printing on Autodrop3D Printers at Spark
- Printing with support is recommended. If you print without support, that's on you.
- All models are printed on a raft. We recommend you position your model accordingly so that you are able to remove the raft.
- Maximum print size is: 200mm length x 200mm width x 300mm Height print area. Practical max print size is probably less than that. Ping the Electronics Leads before starting a massive print.
Questions or problems? Ping the Electronics Leads.