Autodrop3D Printing Guidelines

From Spark Makerspace
Revision as of 21:02, 26 October 2020 by Drew (talk | contribs)
Jump to navigation Jump to search

Guidelines for Printing on Autodrop3D Printers at Spark

  • Printing with support is not recommended. If you print without support, that's on you.
  • All models are printed on a raft. We recommend you position your model accordingly so that you are able to remove the raft.
  • Maximum print size is: 280mm Dia x 385mm H print area. Practical max print size is probably less than that. Ping the Electronics Leads before starting a massive print.

Questions or problems? Ping the Electronics Leads.

Retrieved from "http://wiki.sparkmakerspace.org/index.php?title=Autodrop3D_Printing_Guidelines&oldid=134"