Difference between revisions of "Autodrop3D Printing Guidelines"
Jump to navigation
Jump to search
(Created page with "===Guidelines for Printing on Autodrop3D Printers at Spark== * Printing with support is not recommended. If you print without support, that's on you. * All models are printed...") |
|||
| Line 1: | Line 1: | ||
| − | ===Guidelines for Printing on Autodrop3D Printers at Spark== | + | ===Guidelines for Printing on Autodrop3D Printers at Spark=== |
* Printing with support is not recommended. If you print without support, that's on you. | * Printing with support is not recommended. If you print without support, that's on you. | ||
Revision as of 21:02, 26 October 2020
Guidelines for Printing on Autodrop3D Printers at Spark
- Printing with support is not recommended. If you print without support, that's on you.
- All models are printed on a raft. We recommend you position your model accordingly so that you are able to remove the raft.
- Maximum print size is: 280mm Dia x 385mm H print area. Practical max print size is probably less than that. Ping the Electronics Leads before starting a massive print.
Questions or problems? Ping the Electronics Leads.