Difference between revisions of "Electronics"
| Line 1: | Line 1: | ||
Spark's Electronics Lab is the home of Spark's electronics, soldering, PCB assembly, robotics, and [[3D Printing]] tools and equipment. | Spark's Electronics Lab is the home of Spark's electronics, soldering, PCB assembly, robotics, and [[3D Printing]] tools and equipment. | ||
| + | |||
| + | ===Electronics Lab Rules=== | ||
| + | |||
| + | * 0. Don't burn down Spark. | ||
| + | * 1. Don't be on fire. | ||
| + | * 2. Respect test equipment ratings. | ||
| + | * 3. If you don't know how to use the equipment, ask someone qualified to teach you. | ||
| + | * 4. When using more than one channel on a piece of test equipment, be careful of "ground loops". | ||
| + | * 5. Clean up your project before leaving for the day. | ||
| + | * 6. If something is broken or needs adjustment, fix it or adjust it, if you know how, or post about it on the forum so someone else can do it. | ||
| + | * 7. If you are directly interfacing your circuit with line voltage (115VAC), always have someone else check what you’re doing before you plug in and then stick around while you work for safety. | ||
| + | * 8. If you take tools from a different area, return them when you’re done or else people get cranky. | ||
| + | * 9. If someone’s in the groove, don’t bother them. | ||
| + | |||
===Tools=== | ===Tools=== | ||
Revision as of 00:53, 27 September 2020
Spark's Electronics Lab is the home of Spark's electronics, soldering, PCB assembly, robotics, and 3D Printing tools and equipment.
Electronics Lab Rules
- 0. Don't burn down Spark.
- 1. Don't be on fire.
- 2. Respect test equipment ratings.
- 3. If you don't know how to use the equipment, ask someone qualified to teach you.
- 4. When using more than one channel on a piece of test equipment, be careful of "ground loops".
- 5. Clean up your project before leaving for the day.
- 6. If something is broken or needs adjustment, fix it or adjust it, if you know how, or post about it on the forum so someone else can do it.
- 7. If you are directly interfacing your circuit with line voltage (115VAC), always have someone else check what you’re doing before you plug in and then stick around while you work for safety.
- 8. If you take tools from a different area, return them when you’re done or else people get cranky.
- 9. If someone’s in the groove, don’t bother them.
Tools
- Weller Soldering Irons
- X-Tronic Hot Air Rework station
- Digital Microscope
- Infrared Reflow Oven
- Oscilloscope (analog)
- Oscilloscope (digital, USB) (requires Windows laptop)
- DDS function Generator
- TV with Chromecast
- Oculus DK2 DevKit (2x)
- Bench Power Supplies
- Dremels
Also: Helping Hands, board vises, assorted pliers/wire strippers/cutters.
Consumables
We do our best to keep the Electronics Lab stocked with solder, heat-shrink tubing, wire, and various connectors. We don't charge for these supplies, but ask that if you find you're using a noticeable quantity that you make a donation or purchase replacements for us. This allows us to keep the Lab stocked and ready for tinkering by all!
Personal Storage
As a general rule, leaving personal projects in the Electronics Lab is not permitted without a prior 👍 from one of the Electronics Leads. If you're working on something small enough to fit it in a Locker, please stow it there. If not, please ask before leaving something behind. Unapproved projects or materials left behind will be disposed of or repurposed accordingly.