Difference between revisions of "Autodrop3D Printing Guidelines"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
===Guidelines for Printing on Autodrop3D Printers at Spark=== | ===Guidelines for Printing on Autodrop3D Printers at Spark=== | ||
| − | * Printing with support is | + | * Printing with support is recommended. If you print without support, that's on you. |
* All models are printed on a raft. We recommend you position your model accordingly so that you are able to remove the raft. | * All models are printed on a raft. We recommend you position your model accordingly so that you are able to remove the raft. | ||
| − | * Maximum print size is: | + | * Maximum print size is: 200mm length x 200mm width x 300mm Height print area. Practical max print size is probably less than that. Ping the [[Electronics Leads]] before starting a massive print. |
Questions or problems? Ping the [[Electronics Leads]]. | Questions or problems? Ping the [[Electronics Leads]]. | ||
Latest revision as of 22:48, 26 October 2020
Guidelines for Printing on Autodrop3D Printers at Spark
- Printing with support is recommended. If you print without support, that's on you.
- All models are printed on a raft. We recommend you position your model accordingly so that you are able to remove the raft.
- Maximum print size is: 200mm length x 200mm width x 300mm Height print area. Practical max print size is probably less than that. Ping the Electronics Leads before starting a massive print.
Questions or problems? Ping the Electronics Leads.