View source for Woodshop Class - Six-Pack Carrier

[[Category:Woodshop]][[Category:Woodshop Class]]
==Description==
This class will teach introductory hand tool use and woodworking assembly techniques. Students will cut, drill, screw, nail, glue, and sand the parts of a six pack carrier, including wooden dividers. At the end of the class, students will take the assembled carrier home to be stained, painted, clear-coated, or left raw to develop a natural patina through use. 

==Tools==
''For tool guides and manuals, see: [[Woodshop Tools]]''
*Cordless drill
*Drill Bits: 
**3/4-inch spade bit
**<nowiki>#</nowiki>6 countersink bit
**1/16-inch twist bit
*Combination square
*Measuring tape
*Pencil
*Awl
*Miter saw
*Screwdriver
*Coping saw or dovetail saw
*Hammer
*Rasp
*Sander

===Certifications===
No certifications occur as part of this class.

==Materials==
*1” x 6” pine or fir (nominal; actual size 3/4" x 5-1/2"), 3 pieces 8-¼ inches long
*1/4" x 1-1/2" x 48” hardwood or plywood; popular will be used for this class
*1/4" x 3-1/2" x 24” hardwood for plywood; poplar will be used for this class
*<nowiki>#</nowiki>8 x 2” flat head wood screws
*17ga x 1” nails
*Wood glue; Titebond II will be used for this class

==Handout==
[[media:WS Class SixPackCarrier Handout.pdf|&dArr; ''Download Six-Pack Carrier Class Handout'']]

==Examples==
<gallery>
File:WS Class Photo 6PackCarrierExample.jpg|Example of the carrier in (non-alcoholic) use
</gallery>